Frame struts

View previous topic View next topic Go down

Frame struts

Post  Jools on Tue Apr 10, 2012 8:39 am

Would anyone have information on the position of the front frame strut, I could do with finding out the distance from the rear strut to the front strut and the angle it's welded onto the frame, I think the front strut should kick up on either side but by how much?


Jools

Posts : 15
Join date : 2010-07-03

View user profile

Back to top Go down

Re: Frame struts

Post  daz.h on Tue Apr 10, 2012 10:26 am

do you have either of the struts still in place?

daz.h

Posts : 857
Join date : 2010-06-27
Age : 47
Location : york

View user profile

Back to top Go down

Frame struts

Post  Jools on Tue Apr 10, 2012 11:33 am

Hi Daz, the rear one is still there, there's no front one at the moment, I have a spare strut but not sure where to weld it on and the correct angle of the 'kick up'


Jools

Posts : 15
Join date : 2010-07-03

View user profile

Back to top Go down

Re: Frame struts

Post  daz.h on Tue Apr 10, 2012 5:09 pm

same as what my frame was like.
i fitted the legsheilds to the rear strut using the rubber washers, so it was all in the right posistion.
then bolted them down and tightened up the legsheilds on to the front of the frame tube.
then fitted the new strut to the legsheilds, again, using washers etc as this will be what you will be fitting when its all done, and then you'll know it will all line up.
once the strut is in place it can be tacked into place like i did, then remove all legsheilds and give the strut a proper weld around the frame.


daz.h

Posts : 857
Join date : 2010-06-27
Age : 47
Location : york

View user profile

Back to top Go down

Re: Frame struts

Post  Sponsored content Today at 4:42 pm


Sponsored content


Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum